Dr Wei Huang

Refereed Research Journal and Conference Papers

• Anees A, Huang W, (2021). Flight Delay Prediction: Data Analysis and Model Development. Proceedings of the 26^th (IEEE) International Conference on Automation and Computing (ICAC’21), (ISBN: 978-1-86043-557-7), pp 264-269, University of Portsmouth, Portsmouth, UK, 2-4 September 2021.
• Mira F, Huang W, (2018). Performance Evaluation of String Based Malware Detection Methods. Proceedings of the 24^th (IEEE) International Conference on Automation and Computing (ICAC’18), (ISBN: 978-1-86220-342-6), pp 604-609, University of Newcastle, Newcastle upon Tyne, UK, 6-7 September 2018. IEEE web link: ieeexplore.ieee.org/document/8749096 DOI: 10.23919/IConAC.2018.8749096
• Mira F, Huang W, Brown A (2017). Improving malware detection time by using RLE and N-gram. Proceedings of the 23^rd (IEEE) International Conference on Automation and Computing (ICAC’17), (ISBN: 978-0-7017-0261-8), pp 209-213, University of Huddersfield, Huddersfield, UK, 7-8 September 2017. IEEE web link: ieeexplore.ieee.org/document/8082001  DOI: 10.23919/IConAC.2017.8082001
• Mira F, Brown A, Huang W, (2016). Novel malware detection methods by using LCS and LCSS. Proceedings of the 22^nd (IEEE) International Conference on Automation and Computing, (ISBN: 978-1-8621813-1-1), pp 554-559, University of Essex, Colchester, UK, 7-8 September 2016. IEEE web link: https://ieeexplore.ieee.org/document/7604978 DOI: 10.1109/IConAC.2016.7604978
• Tan Y, Huang W, Sun Y, Yue Y (2014). Scheduling and optimisation of batch plants: model development and comparison of approaches. International Journal of Computer Applications in Technology. Volume 49, No. 3/4, pp. 227-238, 2014. (DOI: 10.1504/IJCAT.2014.062359) (https://uobrep.openrepository.com/handle/10547/333414)
• Maple C, Prakash E, Huang W, Qureshi A (2014). Taxonomy of optimisation techniques and applications. International Journal of Computer Applications in Technology. Volume 49, No. 3/4, pp. 251-262, 2014. (DOI: 10.1504/IJCAT.2014.062361) (https://uobrep.openrepository.com/handle/10547/333415)
• Viduto V, Maple C, Huang W, Lopez-Perez D (2012). A novel risk assessment and optimization model for a multi-objective network security countermeasure selection problem. Decision Support Systems. Volume 53, Issue 3, pp.599-610, June 2012. (DOI:10.1016/j.dss.2012.04.001)
• Tan Y, Huang W, Sun Y, Yue Y (2012). Comparative study of different approaches to solve batch process scheduling and optimisation problems. Proceedings of the 18^th (IEEE) International Conference on Automation and Computing, pp 259-264, (ISBN:978-1-908549-00-6), Loughborough, UK, 7-8 September 2012.
• Viduto V, Maple C, Huang W, Bochenkov A (2012). A multi-objective genetic algorithm for minimising network security risk and cost. IEEE International conference on High Performance Computing and Simulation, page 462-467 Madrid, Spain, July 2012. (DOI: 10.1109/HPCSim.2012.6266959)
• Viduto V, Maple C. Huang W, (2011). Managing Threats by the Use of Visualisation Techniques. International Journal of Space-Based and Situated Computing. Vol. 1, Nos. 2/3. pp. 204-212, 2011.
• Viduto V, Huang W. Maple C (2011). Toward Optimal Multi-Objective Models of Network Security: Survey. Proceedings of the 17^th (IEEE) International Conference on Automation and Computing, pp 6-11, (ISBN: 978-1-4673-0000-1), Huddersfield, UK, 10 September 2011.
• Huang W, Li R, Maple C, Yang H, Foskett D, Cleaver V, (2010). A Novel Lifecycle Model for Web-based Application Development in Small and Medium Enterprises. International Journal of Automation and Computing. pp389-398, 7(3) August 2010.
• Viduto, V, Maple, C, Huang W., (2010), “An analytical evaluation of network security modeling techniques applied to manage threats”, International Conference on Broadband, Wireless Computing, Communication and Applications, pp 117-123, Japan, 2010. (DOI:10.1109/BWCCA.2010.58)
• Mohammed A, Huang W., Zhang J (2010).  A Mathematical Programming Approach to Solve the Mobile WiMax Base Station Location Problem. Proceedings of the 16^th International Conference on Automation and Computing, pp1-6, Birmingham, UK, 11 September 2010.
• Viduto V, Huang W. Maple C (2010). A Novel Strategy for Optimal Security Investments. Proceedings of the 16^th International Conference on Automation and Computing, pp244-249, Birmingham, UK, 11 September 2010.
• French, T., and Huang, W. (2010).  Intangible Trust Reqs., how to fill the gap?, Procs. Nordichi 2010: Proceedings of the First International Workshop on the Interplay between User Experience and Software Development. Rekjavick, Iceland, October 17th, 2010. CEUR Workshop Procs.. Vol. 656, 13-17.
• Huang W, Li R, Maple C, Yang H, Foskett D, Cleaver V, (2008). Web application development lifecycle for small medium-sized enterprises (SMEs). Proceedings of the 8^th International conference on quality software (QSIC 2008), pp247-252, 12-13 August 2008, Oxford, UK, Published by IEEE Computer Society, ISBN 978-0-7695-3312-4.
• Huang W, Chen B. (2007). Scheduling of Batch Plants: Constraint-Based Approach and Performance Investigation. International Journal of Production Economics, Vol. 105, pp425-444, ISSN 0925-5273.
• Ratchev S, Liu S, Huang W, Becker A.A. (2007). Machining simulation and system integration combining FE analysis and cutting mechanics modeling. International Journal of Advanced Manufacturing Technology, 35, pp 55-65.
• French T, Huang W, Hill R, Polovina S, (2007). Semiotic models of trust and usability for agent-managed grid services. Proceedings of the 15^th international workshops on Conceptual Structures (ICCS 2007), 22^nd- 27^th July 2007, Sheffield, pp25-30, ISBN 978-1-84628-990-3, Akhgar, B. (ed.), Springer (London).
• Bessis N, French T, Burakova-Lorgnier M., Huang W (2007). Using Grid for Data Sharing to Support Intelligence in Decision Making. In Xu M. (ed), Managing Strategic Intelligence: Techniques and Technologies. Idea Group Publishing Inc. ISBN 978-1-59904-243-5.
• Ratchev S, Liu S, Huang W, Becker A.A. (2006). An advanced FEA based force induced error compensation strategy in milling. International Journal of Machine Tools & Manufacture. Vol. 46, pp542-551, ISSN 0890-6955.
• Ratchev S, Liu S, Huang W, Becker A.A. (2006). An advanced machining simulation environment employing workpiece structural analysis. Journal of Achievements in Materials and Manufacturing Engineering, 16 (1-2), pp 139-144.
• Huang W, French T, Maple C, Bessis N, (2006). Can intelligent optimisation techniques improve computing job scheduling in a Grid environment? Review, problem and proposal. Proceedings of the UK e-Science all hand meeting, pp328-331, ISBN 0-9553988-0-0, Nottingham, 2006.
• Li R, Huang W, Foskett D, Cleaver V, (2006). “A novel life cycle methodology for web application development in SMEs”. in Proceedings of the 12^th Chinese Automation and Computing Society Conference in the UK, pp199-204, ISBN 0 9533890 9 X, Loughborough, England, 16 September 2006.
• Conrad M., French T., Huang W, Maple C, (2006). “A lightweight model of trust propagation in a multi-client network environment: to what extent does experience matter?”. In Proceeding of the IEEE ARES 2006 – The First International Conference on Availability, Reliability and Security, pp 482-487, ISBN 0-7695-2567-9 (published by IEEE Computer Society), Vienna University of Technology, Austria, 20^th-22^nd April 2006.
• Huang W, Chung P.W.H. (2005). Integrating Routing and Scheduling for Pipeless Plants in Different Layouts. Computers and Chemical Engineering. Vol. 29, pp1069-1081, ISSN 0098-1354.
• Ratchev S, Phuah K, Lämmel G, Huang W (2005). An Experimental Investigation of Fixture-Workpiece Contact Behaviour for the Dynamic Simulation of Complex Fixture-Workpiece Systems. Journal of Materials Processing Technology. Vol. 164-165, pp. 1597-1606, ISSN 0924-0136.
• French T, Huang W, (2005). “Grid enabled collaborative computing: Is trust the hardest issue to address?”. in Proceedings of the 11^th Chinese Automation and Computing Society Conference in the UK, pp131-136, ISBN 0 9533890 8 1, Sheffield, England, 10 September 2005.
• Huang W, French T (2005). “Dynamic scheduling of pipeless plants using constraint programming and depth-first search”, in Proceedings of the 11^th Chinese Automation and Computing Society Conference in the UK, pp61-66, ISBN 0 9533890 8 1, Sheffield, England, 10 September 2005.
• Ratchev S, Phuah K, Lämmel G, Huang W, (2005). An Experimental Investigation of Fixture-Workpiece Contact Behaviour for the Dynamic Simulation of Complex Fixture-Workpiece Systems. Proceedings of the 8^th International conference on Advances in Materials and Processing Technologies, Gliwice-Wisla, Poland, 16th-19th May 2005, pp. 495-498, ISBN 83 89728 13 3 (full text in a CD). Abstracts are in another volume (ISBN 83 89728 12 5).
• Ratchev S, Huang W, Liu S, Becker A.A. (2004). Modelling and Simulation Environment for Machining of Low Rigidity Components. Journal of Materials Processing Technology. Vol. 153-154, pp67-73, ISSN 0924-0136.
• Ratchev S, Liu S, Huang W, Becker A.A. (2004). Milling error prediction and compensation in machining of low-rigidity parts. International Journal of Machine Tools and Manufacture, Vol. 44, pp1629-1641, ISSN 0890-6955.
• Ratchev S, Liu S, Huang W, Becker A.A. (2004). Flexible Force Model for End Milling of Low-Rigidity Parts. Journal of Materials Processing Technology. Vol. 153-154, pp134-138, ISSN 0924-0136.
• Ratchev S, Huang W, Phuah K, Liu S, Becker A. A. (2004). FEA-Based Simulation for Dynamic Fixture-Workpiece Behaviour during Grinding Processes. Proceedings of the 37^th CIRP international seminar on manufacturing system, Budapest, Hungary, May 19-21, 2004, pp.141-147, ISBN 963 214 905X.
• Huang W, Chung P.W.H. (2003). A Constraint Approach for Rescheduling Batch Processing Plants Including Pipeless Plants. Computer-Aided Chemical Engineering, Vol. 14, pp161-166, ISSN 1570-7946 (Series), Published by ELSEVIER.
• Ratchev S, Huang W, Liu S, Becker A. A. (2003). Modelling and Simulation Environment for Machining of Low Rigidity Components. Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT 2003), Dublin, 8-11 July, 2003, pp. 313-316, ISBN: 1872327397.
• Ratchev S, Liu S, Huang W, Baker A.A. (2003). Flexible force model for end milling of low-rigidity parts. Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT2003), Dublin, 8-11 July, 2003, pp836-839, ISBN: 1872327397.
• Huang W. (2003). Scheduling Pipeless Plants in Herringbone Layout. Proceedings of the 9^th Chinese Automation & Computing Society Conference in the UK, Luton, England, 20 September 2003, pp355-360, ISBN 0 9533890 6 5.
• Huang W. (2002). Rescheduling Chemical Batch Plants Using Constraint Satisfaction Technique. Proceedings of the 8^th Chinese Automation & Computing Society Conference in the UK, Manchester, 21 September 2002, pp157-162, ISBN: 0953389057.
• Huang W. (2001). Scheduling of Multiproduct Batch Plants with Shared Storage Using a Constraint-based Approach. Proceedings of the 7^th Chinese Automation & Computing Society Conference in the UK, Nottingham, 22 September 2001, pp67-72, ISBN: 0953389049.
• Huang W, Chung P.W.H. (2000). Scheduling of Pipeless Batch Plants Using Constraint Satisfaction Techniques. Computers and Chemical Engineering, Vol. 24, No. 2-7, pp377-383, ISSN: 0098-1354.
• Das B.P., Shah N., Chung P.W.H. Huang W, (2000). Comparative Study of Time-Based and Activity-Based Production Scheduling. Hungarian Journal of Industrial Chemistry, Vol. 28, pp7-10, HU ISSN: 0133-0276.
• Huang W, Chung P.W.H. (1999). Scheduling of Multistage Multiproduct Chemical Batch Plants Using a Constraint-Based Approach. Computers and Chemical Engineering, Vol. 23, ppS522-S514, ISSN 0098-1354.
• Huang W, Huang Y, Xie C (1997). Research on the Method of Expression and Coded-Classification System for Assembly-Oriented Machine Parts. Journal of Guangdong University of Technology, （In Chinese, 广东工业大学学报）Vol.14, No.2 (Jun.), pp69-74, ISSN 1007-7162.
• Huang W, Huang Y. (1996). Research and Design of Reconfigurable Compliant Fixture Used in Robotic Flexible Assembly System. China Mechanical Engineering, （In Chinese, 中国机械工程）Vol.7, No.6 (Dec.), pp77-79, ISSN 1004-132X.